Product category Suspension

Filling and Bleeding Device for eSuspension SDS 5 (230V) Article no.: 400.500.000
Show more
Technical data
Artikelnummer400.500.000
Max. working pressure40 bar
New oil container volume8 Liter
Old oil container volume10 Liter
Power cord length3,000 mm
Mains voltage230 V / 50 hz
Dimensions650 x 660 x 960 mm
Weight70 kg
EAN-Nr.4251705200141
Filling and Bleeding Device for eSuspension SDS 5 (230V)

The Active Body Control chassis is the introduction of a new, active and innovative suspension system to the market. The suspension system operates at roughly 30 bar and therefore requires a device that is specially designed to withstand these pressures for emptying, flushing and filling. Work on the suspension system must be carried out not only in the event of damage to the suspension system itself, but also during repair and replacement work on other parts such as the wishbone. In order to guarantee correct filling and to avoid damage to the system, proper maintenance can only be carried out with this device.

OTHER FEATURES:

  • 110 V version available
  • Solid metal housing
  • Safe operation of high pressures
  • GS tested
  • Including adapter pliars
  • Including 10 L collection container for used fluids

 

DELIVERY INCLUDES:

Filling and Bleeding Device for eSuspension SDS 5

Related products
Suspension Evacuation Device SDE 96 (230V)

Article no.: 400.501.000
Suspension Evacuation Device SDE 96 (230V) Article no.: 400.501.000
Show more
Technical data
Artikelnummer400.501.000
ConnectionStandard compressed air connection, nominal width 7.2 mm
Maximum negative pressure of the vacuum pump0.98 bar
Volume of oil separatorca. 0.5 l
Volume of compensation containerbis 0.75 l
Filling speed0.6 l/min
Mains voltage230 V / 50 hz
Power450 W
Noise≤ 70 db (A)
Dimensions520 x 650 x 580 mm
Weightca. 40 kg
Suspension Evacuation Device SDE 96 (230V)

The CVSA2/Kinetic® suspension combines sportiness and comfort. In this suspension, each shock absorber is connected to each other via two hydraulic circuits and various valves. To be able to fill these hydraulic circuits with fresh hydraulic oil in the event of damage, a device is required that first removes the old oil from the circuits, then evacuates the circuits to almost -1 bar and finally fills them with fresh hydraulic oil at high pressure.

All these requirements are fulfilled by the Suspension Evacuation Device SDE96 in combination with the Filling and Bleeding device for eSuspension SDS5 (ATTENTION: Both units are needed to perform a flushing or refilling of the CVSA2/Kinetic® suspension).

During the complete repair process, only two hoses need to be connected and disconnected from the vehicle. All functions of the unit can be reached by setting two levers.

The Suspension Evacuation Device can only be used in combination with the Filling and Bleeding Device for eSuspension SDS5 (Art.No. 400.500.000) of company GL-GmbH.

Related products
Filling and Bleeding Device for eSuspension SDS 5 (230V)

Service for active suspensions


Article no.: 400.500.000
Suspension Evacuation Device SDE 96 (110V) Article no.: 400.504.000
Show more
Technical data
Artikelnummer400.504.000
ConnectionStandard compressed air connection, nominal width 7.2 mm
Maximum negative pressure of the vacuum pump0.98 bar
Volume of oil separatorca. 0.5 l
Volume of compensation containerbis 0.75 l
Filling speed0.6 l/min
Mains voltage110 V / 60 hz
Power450 W
Noise≤ 70 db (A)
Dimensions520 x 650 x 580 mm
Weightca. 40 kg
Suspension Evacuation Device SDE 96 (110V)

The CVSA2/Kinetic® suspension combines sportiness and comfort. In this suspension, each shock absorber is connected to each other via two hydraulic circuits and various valves. To be able to fill these hydraulic circuits with fresh hydraulic oil in the event of damage, a device is required that first removes the old oil from the circuits, then evacuates the circuits to almost -1 bar and finally fills them with fresh hydraulic oil at high pressure.

All these requirements are fulfilled by the Suspension Evacuation Device SDE96 in combination with the Filling and Bleeding device for eSuspension SDS5 (ATTENTION: Both units are needed to perform a flushing or refilling of the CVSA2/Kinetic® suspension).

During the complete repair process, only two hoses need to be connected and disconnected from the vehicle. All functions of the unit can be reached by setting two levers.

The Suspension Evacuation Device can only be used in combination with the Filling and Bleeding Device for eSuspension SDS5 (Art.No. 400.502.000) of company GL-GmbH.

Evacuation and filling device for shock absorbers Article no.: 400.505.100
Show more
Technical data
Artikelnummer400.505.100
Volumen Frischölcontainer10 l
Max. working pressure40 bar
Power cord length3,000 mm
Mains voltage230 V
Evacuation and filling device for shock absorbers

The EBS100 is the only device of its kind in the world. It can be used to perform service on the most advanced suspension systems. The ability to flexibly adjust the pressure is particularly suitable for flushing the kinetic suspensions of all current and future vehicles.

Due to the simple operation and the robust construction made of steel, it is well equipped to withstand the tough daily workshop routine.

High-quality handles, smooth-running heavy-duty rollers with large radii and an impact-resistant powder coating make the EBS100 a device for many years of use.

FUNCTIONS:

  • Independent venting of the internal device pipelines
  • Inspection through integrated sight glass
  • Bubble free filling of hydraulic systems with adjustable pressure between 4 and 40 bar
  • Bringing hydraulic systems to ambient pressure in a controlled manner through drain hose with ball valve
  • Connection to waste oil tank via oil drain hose
  • Blowing out hydraulic systems with compressed air
  • Disposal of used oil in canister
  • Generation of vacuum up to an absolute pressure of 0.002 bar

All functions can be realized by turning two levers. Once connected to the vehicle it is not necessary to reconnect hoses during this process.

Other features:

  • 110V Version available
Evacuation and filling device for shock absorbers Article no.: 400.505.200
Show more
Technical data
Artikelnummer400.505.200
Volumen Frischölcontainer10 l
Max. working pressure40 bar
Power cord length3,000 mm
Mains voltage110 V
Evacuation and filling device for shock absorbers

The EBS100 is the only device of its kind in the world. It can be used to perform service on the most advanced suspension systems. The ability to flexibly adjust the pressure is particularly suitable for flushing the kinetic suspensions of all current and future vehicles.

Due to the simple operation and the robust construction made of steel, it is well equipped to withstand the tough daily workshop routine.

High-quality handles, smooth-running heavy-duty rollers with large radii and an impact-resistant powder coating make the EBS100 a device for many years of use.

FUNCTIONS:

  • Independent venting of the internal device pipelines
  • Inspection through integrated sight glass
  • Bubble free filling of hydraulic systems with adjustable pressure between 4 and 40 bar
  • Bringing hydraulic systems to ambient pressure in a controlled manner through drain hose with ball valve
  • Connection to waste oil tank via oil drain hose
  • Blowing out hydraulic systems with compressed air
  • Disposal of used oil in canister
  • Generation of vacuum up to an absolute pressure of 0.002 bar

All functions can be realized by turning two levers. Once connected to the vehicle it is not necessary to reconnect hoses during this process.

Other features:

  • 110V Version available